KEKUATAN DAN UMUR FATIK STRUKTUR PENOMPANG JAW CRUSHER DENGAN METODE ELEMEN HINGGA

  • Nurhayati ISTN
  • T R Wijaya ISTN
DOI: https://doi.org/10.35814/infrastruktur.v5i1.616
Abstract views: 670 | pdf downloads: 1317
Keywords: fatigue, finite element, jaw crusher, constant amplitude events

Abstract

The structure would be work well accordance to its capacity and it has the static loadings that were under limit the yield strength of the material, can be subjected to failure during operations, and this is because the structure receives additional dynamic loads that occur repeatedly within a long period of time as known as cyclic loads or fatigue loads. The purpose of the fatigue analysis is to find out the working life of structure so, the structure can be planned to repair and strengthen without disturbing the operation process. In real operations, the structure support of jaw crusher receives fatigue load from the equipment which standing on it. Structure alaysed by used finite element method with the aim to get more accurate analysis results. The type of analysis used is constants amplitude events. Based on the analysis results obtained the life of the jaw crusher is for 67000 cycles or 8 months 28.

References

Adam, K. (2011). Faktor Perpatahan dan Kelelahan pada Kekuatan Bahan Material, ILTEK, Volume 6, Nomor 12.

Akuan, A. (2007). Kelelahan Logam. Jurusan Teknik Metalurgi Fakultas Teknik, Universitas Jenderal Achmad Yani.

Anderse, MR. (1998). Fatigue Crack Initiation and Growth in Ship Structure, Thesis Department of Naval Architecht of Offshore Engineering. Denmark: Technical university of Denmark.

Bahreini, R. S., Nematollahi, A. F. & Jafari, A. (2016). Experimental and Finite Element Study of Bending Fatigue Failure: A Case Study on Main Shaft of a Gyrator Crusher. International Journal of Civil and Environmental Engineering, 10(11), 1387 – 1392.

Bolotin, V.V. (1999). Mechanics of fatigue. Boca Raton, CRC Press.

Fuchs, H.O., & Ralph, I. (1983). Metal Fatigue in Engineering, John Willey & Sons. New York.

Iridiatadi, H, Ir, MSIE, Ph.D. (2014). Penerapan Fatigue Managemen di Industri, RSK & E ITB.

Krupp, U. (2007). Fatigue Crack Propagation in Metals and Alloys.

Lloyd, G. (2008). Rules for classification and construction ship technology of Chemical Tanker.

McDowell, D.L., & Dunne, F.P.E. (2010). International Journal of Fatigue, 1521-1542. Cited in https://www.journals.elsevier.com/international-journal-of-fatigue. [16 Februari 2019]

Nur, H, (2007). Laju Perambatan Retak Plat Aluminium 2024 T3 Dengan Pola Lubang Pada Beban Fatik Uniaksial Amplitudo Konstan, Jurusan Teknik Mesin Fakultas Teknologi Industri Institut Teknologi Sepuluh November Surabaya.

Rusiński, E., Moczko, P., Odyjas, P. & Pietrusiak, D. (2013). Investigations of Structural Vibrations Problems of High-Performance Machines. Faculty of Mechanical Engineering, Belgrade, 41, 305 – 310.

Rusiński, E., Moczko, P., Pietrusiak, D. & Przybyłek, G. (2013). Experimental and Numerical Studies of Jaw Crusher Supporting Structure Fatigue Failure. Journal of Mechanical Engineering, 59(9), 555 – 563. Cited in https://www.researchgate.net/journal/0039-2480_Strojniski_Vestnik. [16 Januari 2019]

Swierstra, E.P. (2017). Fatigue Assessment in Finite Element Analysis. MSc Thesis. Department of Structural Engineering, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft, The Netherlands.

Suresh, S. (1998). Fatigue of Materials, 2nd ed. Cambridge University Press.

Taufik, A. (2003). Paper: Aplikasi Failure Analysis Diagram untuk Mengevaluasi Integritas Mekanik Pipa Transmisi Gas yang mengandung Cacat pada Lasan, Indonesian Pipeline Technology. ITB. Bandung

Published
2019-07-22
How to Cite
Nurhayati, & T R Wijaya. (2019). KEKUATAN DAN UMUR FATIK STRUKTUR PENOMPANG JAW CRUSHER DENGAN METODE ELEMEN HINGGA. Jurnal Infrastruktur , 5(1), 1 - 5. https://doi.org/10.35814/infrastruktur.v5i1.616