PENGARUH PENGGUNAAN LIMBAH PLASTIK POLYPROPYLENE (PP) SEBAGAI CAMPURAN AGREGAT KASAR TERHADAP KUAT TEKAN DAN TARIK PADA BETON FC’ 25 MPA

  • Angga Pirman Firdaus Universitas Pancasila
  • Jonbi Universitas Pancasila
DOI: https://doi.org/10.35814/infrastruktur.v3i2.706
Abstract views: 426 | pdf downloads: 959
Keywords: Plastic Waste, Polypropylene (PP), Strength Test, Tensile Test

Abstract

Indonesia ranks second in the world's largest plastic waste producer after China. Each year, Indonesia can contributeup to 187.2 million tons of plastic waste, while China reaches 262.9 million tons of plastic waste. Based on the data, one way to utilize plastic waste by using plastic waste as a mixture of concrete, where the plastic used is polypropylene (PP) plastic with different percentage of concrete mixture, the test includes compressive strength test and tensile concrete. The results of concrete compressive strength testing with polypropylene (PP) plastic waste mixture of 5%, 10% and 15% at age 28 in aggregate aggregate mixture decreased by 5.15%, 6.89% and 13.53%. As for the result of concrete tensile strength test with polypropylene (PP) plastic waste mixture of 5%, 10% and 15% at age 28 in crude aggregate mixture decreased 17,61%, 24,13% dan 23,24%.

References

Charudatta, Thosar, & M.Husain. (2017). Reuse of Plastic Waste as Replacement of Sand in Concrete. IJIRSET.

Felixon, K. (2011). Penelitian Terhadap Pengembangan Penggunaan Material Plastik (Polikarbonat) Pada Selubung Bangunan. Seminar Nasional AVoER ke-3.

Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., . . . Law, K. L. (2015). Plastic Waste Inputs From Land Into The Ocean. sciencemag.org.

Nugraha, P., & Antoni. (2007). Teknologi Beton "Dari Material, Pembuatan, Ke Beton Kinerja Tinggi". ANDI.

Pamudji, G., Intang, N., & Rahman, A. N. (2008). Pengaruh Pemakaian Bahan Tambah Limbah Plastik Kemasan Air Mineral Terhadap Kuat Tekan Dan Kuat Tarik Belah Beton. 4.

Pane, F. P., Tanudjaja, H., & Windah, R. S. (2015). Pengujian Kuat Tarik Lentur Beton Dengan Variasi Kuat Tekan Beton. 3.

Ridwan, F. F., Subari, & Yulius, E. (2014). Pengaruh Penggunaan Cacahan Gelas Plastik Polypropylene (PP) Terhadap Kuat Tekan Dan Tarik Beton. 2.

Tjokrodimuljo, K. (2007). Teknologi Beton. Yogyakarta: Biro Penerbit Teknik Sipil.

Published
2019-10-01
How to Cite
Angga Pirman Firdaus, & Jonbi. (2019). PENGARUH PENGGUNAAN LIMBAH PLASTIK POLYPROPYLENE (PP) SEBAGAI CAMPURAN AGREGAT KASAR TERHADAP KUAT TEKAN DAN TARIK PADA BETON FC’ 25 MPA. Jurnal Infrastruktur , 3(2), 81-89. https://doi.org/10.35814/infrastruktur.v3i2.706