Ketelitian Geometrik dan Unjuk Kerja Mesin Bubut Retrofit PL 1000 G dengan Kendali Numerik

Mohammad Yunan Setyawan; Budhi M. Suyitno; Susanto Sudiro

doi:10.35814/teknobiz.8gt19t61

Authors

Mohammad Yunan Setyawan Universitas Pancasila
Budhi M. Suyitno
Susanto Sudiro

DOI:

https://doi.org/10.35814/teknobiz.8gt19t61

Keywords:

Mesin Bubut Retrofit, Uji Geometris, Uji Unjuk Kerja

Abstract

Development of equipment has been carried out in the form of adding NC systems to conventional lathes, namely PL 1000 G retrofit lathe machines integrated with the GSK 928 TE II control system.The reliability of CNC machines that have been developed needs to be tested in terms of accuracy and precision so that the influence of numerical control systems on the level of accuracy and precision is known.Tests carried out on PL 1000 G retrofit lathes include geometric testing of machine tools and testing of machine performance in accordance with SNI-05-1612-1989.

From testing the performance of the retrofit machine using test samples for cylindrical tests, flatness test and thread test results nothing comes out of the tolerance limit. So overall the performance of PL 1000 G retrofit machines with numerical control is in accordance with the requirements of the SNI-05-1612-1989 standard.

Downloads

Download data is not yet available.

References

[1.] Bagiasna, Komang. (1982). Pengantar Pengujian Ketelitian Geometrik Mesin Perkakas, Laboratorium Teknik Produksi dan Metrologi industry. Jurusan Teknik Mesin. Institute Teknologi Bandung.

[2.] Rochim, Taufiq (2001). Spesifikasi, Metodologi & Kontrol Kualitas Geometrik. Bandung : Institute Teknologi Bandung.

[3.] Wijanarka, B. Sentot, MT. “ Dasar Pemrograman untuk Mesin Bubut CNC dengan GSK 928 TE”. Universitas Negeri Yogyakarta.

[4.] Groover, Mikel P. (2001). Automation, Production Systems, And Computer – Integrated Manufacturing. New Jersey : Prentice – Hall Inc.

[5.] Koren, Yoram., Alexander Shani.,Senior member IEEE and J. Ben – URI. (1970). “Numerical Control of a Lathe” . IEE Transactions on Industry and General Application Vol. IGA – 6 ,No 2.

[6.] Liang – xiong, XU., Zhou Xiang. (2012). “ The Electrical And Mechanical Alignment And Accuracy Detection Of Numerical Control Machine Tool”. International Journal of Plant Engineering and Management. Vol. 17 , No. 1.

[7.] Permana, Fikri Yoga., Dr. Ir. Moch. Rameli. (2012). “Pengaturan Kecepatan Spindle pada Retrofit Mesin Bubut CNC menggunakan Kontroler PI Gain Schedulling”. Jurnal Teknik POMITS Vol 1, No. 1, 1-5.

[8.] Abidin, Zaenal. “ Pengujian Kualitas Geometrik Mesin Bubut Dan Pengaruhnya Terhadap Kualitas Produksi”. Jurnal Teknik Mesin Politeknik Negeri Semarang.

[9.] Kuspriyanto.,Hari seputro. “ Mesin CNC”. Departemen Teknik Elektro, Fakultas Teknologi Industri, ITB.

[10.] Hadi, M. Elfan. (2008). “Akurasi Mesin Bubut Training Unit Cnc Tu-2a Melalui Pengukuran Diameter Produk”. Jurnal Teknik Mesin Vol. 5 No. 2 ISSN 1829-8958.

[11.] Hafid, Abdul. (2008). “ Uji Awal Up Grade Mesin Frais Konvensional Menjadi Mesin Frais CNC Berbasis PC”. Sigma Epsilon ISSN 0853-9103 Vol. 2 No 1.

[12.] Djambar, Riswan. (2010). “ Rancang Bangun Instalasi Sistem Kontrol Pada Otomasi Mesin Bubut Alpine – 350”. Sigma Epsilon ISSN 0853 – 9103 Vol.14 No. 2.

[13.] Setiono, Iwan., Andry Mahesa Nugraha. “ Analisa Kerja Mesin Bubut LeBlond 17”. Jurnal Teknik Mesin FTI. Universitas Jayabaya Jakarta.

[14.] Munadi, Sudji dkk. (2009). “ Pelatihan Teknologi Pengujian Geometrik Mesin Bagi Guru Smk Swasta Untuk Meningkatkan Kualitas Pembelajaran Praktik Kerja Mesin”. Universitas Negeri Yogyakarta.