Analisis Pengaruh Desain Tangki Mobil untuk Kapasitas 5000 Liter Gas Terhadap Tekanan Permukaan
The Impact of Surface Pressure on the Design of a 5,000-Liter Automobile Gas Tank
Abstract views: 112 | pdf downloads: 167
Abstract
The tank car is a closed storage area or tank designed to contain the liquid as a gas or liquid at a different pressure than the ambient pressure. Chemical reactions with the fluid inside a car's tank or physical phenomena the fluid encounters can cause instantaneous changes in the condition of the tank, resulting in occasional cracking or leaking. This research aims to determine how the design shape of a 5000-liter tank affects surface pressure. The method utilized is the finite element method based on computer-aided engineering (CAE) with the software Ansys Workbench Student Version. The results demonstrated that the maximal stress value and total deformation of the Model 2 tank were significantly different from those of the Model 1 and Model 3 tanks. The tank variation of the model is known to have the lowest stress value of 1.1309 MPa and the lowest deformation value of 0.0042421 mm. Therefore, the Model 2 tank variants are more recommended than the Models 1 and 3 for vehicles with a 5000-liter capacity.
References
ANSYS (2023) Ansys Student - Free Software Download. Available at: https://www.ansys.com/academic/students/ansys-student (Diakses: 7 Januari 2023).
Arunkumar, S., Moorthy, P.R.E. dan Karthik, N. (2020) ‘Design optimization of horizontal pressure vessel’, in Materials Today: Proceedings. 10th International Conference of Materials Processing and Characterization, India: Elsavier, hal. 1526–1531.
ASTM (2023) ‘Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service’. ASTM International. Available at: https://www.astm.org/a0515_a0515m-17r22.html (Diakses: 15 Mei 2023).
Chauhan, G.S. dan Awasthi, A. (2018) ‘Design and Analysis of high pressure composite vessels’, International Journal of Latest Engineering and Management Research (IJLEMR), 3(6), hal. 96–102.
Dechaumphai, P. dan Sucharitpwatskul, S. (2018) Finite Element Analysis with ANSYS Workbench. United Kingdom: Alpha Science International [Cetak].
Gamayel, A. dan Octavianus, G. (2021) Tutorial Ansys Workbench Untuk Bidang Mekanikal: Jilid 1. Bandung: CV. Media Sains Indonesia [Cetak].
Gamayel, A. dan Octavianus, G. (2022) Tutorial Ansys Workbench Untuk Bidang Mekanikal: Jilid 2. Bandung: CV. Media Sains Indonesia [Cetak].
Kumar, A.E. dkk. (2018) ‘Static and Dynamic Analysis of Pressure Vessels With Various Stiffeners’, in Materials Today: Proceedings. 7th International Conference of Materials Processing and Characterization, India: Elsavier, hal. 5039–5048.
Kumar, B.S. dkk. (2018) ‘Stress Analysis And Design Optimization Of A Pressure Vessel Using Ansys Package’, in Materials Today: Proceedings. 7th International Conference of Materials Processing and Characterization, India: Elsavier, hal. 4551–4562.
Kushwah, S. dkk. (2022) ‘Analysis of cylindrical pressure vessels with dissimilar ends and material comparison’, in Materials Today: Proceedings. 1st International Conference on Computations in Materials and Applied Engineering, India: Elsavier, hal. 355–368.
Li, W.J. dkk. (2014) ‘Finite Element Analysis and Optimum Design for Pressure Vessel Based on ANSYS Workbench’, Applied Mechanics and Materials, 687–691, hal. 290–293.
Liawan, J.P., Tanujaya, H. dan Darmawan, S. (2023) ‘Analisis Aliran Udara dan Kenyamanan Termal di Laboratorium Perpindahan Panas dan Massa menggunakan Metode Computational Fluid Dynamics (CFD)’, Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa Dan Inovasi, 5(1), hal. 123–134.
Stolarski, T., Nakasone, Y. dan Yoshimoto, S. (2018) Engineering Analysis with ANSYS Software. Butterworth-Heinemann [Cetak].
