ANALYTICAL STUDY OF BABY BED DESIGN WITH ERGONOMICS AND SAFETY STANDARDS APPROACH
DOI:
https://doi.org/10.35814/tknhj153Keywords:
Product design, baby crib, ergonomics, safety standards, product safetyAbstract
This study aims to analyze the design of baby cribs using an ergonomic approach and safety standards to ensure infants’ comfort, safety, and health during sleep. The design of baby cribs is a crucial aspect as it is directly related to infants’ growth and physical development stages. An inappropriate design may pose risks of injury, sleep disturbances, and health problems such as plagiocephaly (flat head syndrome). The research methods include a literature review of existing product designs, analysis of applicable safety standards, interviews with pediatric health experts, and evaluation of commercial products available on the market. The analysis focuses on structural aspects, material selection, product dimensions based on infant anthropometry, and the completeness of safety features. The results indicate that baby crib design must comply with ergonomic principles to support proper infant posture, use safe and non-toxic materials, incorporate sturdy construction with protective systems that minimize the risk of entrapment or falls, and provide adequate ventilation as well as ease of maintenance. Furthermore, the implementation of certified safety standards is an important factor in increasing parents’ trust and sense of security.By integrating ergonomic principles and safety standards, baby crib designs are expected to provide optimal protection and support healthy sleep quality for infants.
Downloads
References
[1] J. A. Mindell and J. A. Owens, “A clinical guide to pediatric sleep,” Sleep Medicine Reviews, vol. 14, no. 6, pp. 389–401, 2010.
[2] S. Graven and J. Browne, “Sleep and brain development,” Clinics in Perinatology, vol. 35, no. 3, pp. 693–706, 2008.
[3] K. A. Mason et al., “Infant sleep environment and sleep outcomes,” Journal of Clinical Sleep Medicine, vol. 12, no. 4, pp. 567–574, 2016.
[4] R. Y. Moon, “Sleep-related infant deaths: Updated recommendations,” Pediatrics, vol. 138, no. 5, 2016.
[5] E. R. Smith et al., “Infant injury hazards associated with sleep products,” Injury Epidemiology, vol. 5, no. 1, pp. 1–9, 2018.
[6] J. L. Thompson and B. T. Thach, “Mechanical suffocation hazards in infant sleep environments,” Journal of Pediatrics, vol. 151, no. 3, pp. 271–275, 2007.
[7] U.S. Consumer Product Safety Commission, “Crib safety standards and injury data analysis,” Accident Analysis Reports, 2019.
[8] J. Wang et al., “Biomechanical assessment of inclined infant sleep products,” Journal of Biomechanics, vol. 120, pp. 110–118, 2021.
[9] S. A. Scheers et al., “Soft bedding and infant suffocation risk,” Pediatrics, vol. 123, no. 2, pp. 459–466, 2009.
[10] I. Pheasant and C. M. Haslegrave, Bodyspace: Anthropometry, Ergonomics and the Design of Work, 3rd ed. Boca Raton, FL, USA: CRC Press, 2006.
[11] P. D. Bust et al., “Ergonomic considerations in children’s product design,” Applied Ergonomics, vol. 42, no. 3, pp. 503–510, 2011.
[12] A. S. Bearer, “Environmental health hazards in children,” Environmental Health Perspectives, vol. 108, no. 3, pp. 613–620, 2000.
[13] European Committee for Standardization, “Safety requirements for children’s cots and folding cots,” EN 716 Standard Documentation, 2017.
[14] ASTM International, “Standard consumer safety specification for full-size baby cribs,” ASTM F1169, 2019.
[15] T. C. Ward et al., “Evaluation of safe sleep interventions and crib distribution programs,” International Journal of Environmental Research and Public Health, vol. 18, no. 13, 2021.
[16] R. Y. Moon, “Sleep-related infant deaths: Updated recommendations for a safe infant sleeping environment,” Pediatrics, vol. 138, no. 5, 2016.
[17] E. R. Smith et al., “Infant injury hazards associated with sleep products,” Injury Epidemiology, vol. 5, no. 1, pp. 1–9, 2018.
[18] J. A. Mindell and J. A. Owens, “A clinical guide to pediatric sleep,” Sleep Medicine Reviews, vol. 14, no. 6, pp. 389–401, 2010.
[19] J. Wang et al., “Biomechanical assessment of inclined infant sleep products,” Journal of Biomechanics, vol. 120, 2021.
[20] S. A. Scheers et al., “Soft bedding and infant suffocation risk,” Pediatrics, vol. 123, no. 2, pp. 459–466, 2009.
[21] J. L. Thompson and B. T. Thach, “Mechanical suffocation hazards in infant sleep environments,” Journal of Pediatrics, vol. 151, no. 3, pp. 271–275, 2007.
[22] A. S. Bearer, “Environmental health hazards in children,” Environmental Health Perspectives, vol. 108, no. 3, pp. 613–620, 2000.
[23] ASTM International, “Standard Consumer Safety Specification for Full-Size Baby Cribs,” ASTM F1169, 2019.
[24] European Committee for Standardization, “Children’s cots and folding cots for domestic use,” EN 716, 2017.
[25] I. Pheasant and C. M. Haslegrave, Bodyspace: Anthropometry, Ergonomics and the Design of Work, 3rd ed. CRC Press, 2006.
[26] P. D. Bust et al., “Ergonomic considerations in children’s product design,” Applied Ergonomics, vol. 42, no. 3, pp. 503–510, 2011.
[27] T. C. Ward et al., “Evaluation of safe sleep interventions and crib distribution programs,” International Journal of Environmental Research and Public Health, vol. 18, no. 13, 2021.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin
This work is licensed under a Creative Commons Attribution 4.0 International License.
