Desain dan Analisis Tanki ISO LNG Kapasitas 40 feet Menggunakan Teknik Finite Element Analysis
Abstract views: 531 | pdf downloads: 1022
Abstract
Development of liquified natural gas (LNG) ISO tank in Indonesia pays significant attention due to this product is still imported and it has high LNG market potential. In addition, this research is in line with national research priorities in the maritime sector to implement energy equality in Indonesia. As a first step in the research, the ISO tank model designed by using CATIA and structural testing using ANSYS software for finite element analysis. This simulation test is carried out to identify areas that receive high stress in the tank shell and the support structure of the tank. In addition, this virtual test was conducted to quantify the stress and safety factor of the ISO tank model. With this simulation, it is hoped that a more efficient and safer ISO tank design that meets existing regulatory standards can be obtained.
References
Anoop, C.R. dkk. (2021) ‘A review on steels for cryogenic applications’, Materials Performance and Characterization, 10(2), hal. 16–88.
ASME, American Society of Mechanical Engineers. (2019) BPVC Section II-Materials-Part D-Properties-(Customary) - ASME. Available at: https://www.asme.org/codes-standards/find-codes-standards/bpvc-iid-bpvc-section-ii-materials-part-d-properties (diakses: 9 July 2021).[Cetak].
ASME, American Society of Mechanical Engineers. (2019) BPVC Section VIII-Division 1 - Rules for Construction of Pressure Vessels - ASME. Available at: https://www.asme.org/codes-standards/find-codes-standards/bpvc-viii-1-bpvc-section-viii-rules-construction-pressure-vessels-division-1 (diakses: 9 July 2021).[Cetak].
ASME, American Society of Mechanical Engineers. (2019) BPVC Section VIII-Division 2 - Alternative Rules - ASME. Available at: https://www.asme.org/codes-standards/find-codes-standards/bpvc-viii-2-bpvc-section-viii-rules-construction-pressure-vessels-division-2-alternative-rules/2021/print-book (diakses: 9 July 2021).[Cetak].
Bhattacharyya, R. dan Hazra, A. (2013) ‘A study on stress analysis of ISO tank container’, in 58th Congress of The Indian Society of Theoretical and Applied Mechanics., hal.1–5. Available at: https://www.researchgate.net/publication/316320046_A_study_on_stress_analysis_of_ISO_tank_container (diakses: 9 July 2021).
DEN, Dewan Energi Nasional. (2019) Outlook Energi Indonesia (OEI) 2019. Dewan Energi Nasional. Available at: https://www.esdm.go.id/assets/media/content/content-outlook-energi-indonesia-2019-bahasa-indonesia.pdf.[Cetak].
ESDM, Kementerian Energi dan Sumber Daya Manusia. (2018) Handbook of Energy and Economic Statistics of Indonesia 2018. Kementerian Energi dan Sumber Daya Mineral. Available at: https://www.esdm.go.id/assets/media/content/content-handbook-of-energy-and-economic-statistics-of-indonesia-2018-final-edition.pdf. [Cetak].
Fahy, M. dan Tiernan, S. (2001) ‘Finite element analysis of ISO tank containers’, Journal of Materials Processing Technology, 119(1–3), hal. 293–298.
Gang, U.G., Lee, S.H. dan Nam, W.J. (2009) ‘The evolution of microstructure and mechanical properties of a 5052 aluminium alloy by the application of cryogenic rolling and warm rolling’, Materials transactions, 50(1), hal. 82–86.
Gupta, P. (2017) Effect of Cryogenic Treatment on Mechanical and Metallurgical Properties of SS 304 L. Available at: https://www.semanticscholar.org/paper/Effect-of-Cryogenic-Treatment-on-Mechanical-and-of-Gupta/79f178058f91ff8f00674336f6c6d2ee50056f47 (diakses: 9 July 2021).
Hany, S. dkk. (2014) ‘Microstructural and mechanical properties of 9% Ni steels used for the construction of LNG storage tanks’, in Advanced Materials Research. Trans Tech Publ, hal. 1953–1957.
ISO, International Organization for Standardization. (1995) ‘Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk’. [Cetak].
Laciak, M. dkk. (2019) ‘Possibilities of Liquefied Natural Gas (LNG) use for power generation’, in IOP Conference Series: Earth and Environmental Science. IOP Publishing, hal. 012138.
Qiu, Y. dkk. (2021) ‘Research progress of cryogenic materials for storage and transportation of liquid hydrogen’, Metals, 11(7), hal. 1101.
Sas, J., Weiss, K.P. dan Jung, A. (2015) ‘The Mechanical and material properties of 316LN austenitic stainless steel for the fusion application in cryogenic temperatures’, in IOP Conference Series: Materials Science and Engineering. IOP Publishing, hal. 012003.
Włodek, T. (2017) ‘Prediction of boil off rate in liquefied natural gas storage processes’, International Multidisciplinary Scientific GeoConference: SGEM, 17(1.5), hal. 405–413.
