Identifikasi Risiko Keselamatan Pekerja Dengan Metode FMEA di Departemen Produksi PT. XYZ
Identification of Worker Safety Risks Using FMEA Method in Production Departments of PT. XYZ
Abstract views: 275 | pdf downloads: 319
Abstract
This research was carried out because it is known that there are six potential work accidents that can occur production departments of PT. XYZ. PT XYZ, so it is necessary to identify employee safety risks to obtain the right solution to prevent the occurrence of work accidents, and the method chosen is failure mode and effect analysis. FMEA is a table-shaped identification tool that is useful for identifying errors, evaluating the effects of errors, and prioritizing errors. Data collection is carried out through observations, interviews, and discussions with employees in production departments of PT. XYZ. Accidents that are the main priority to resolve first are milling machine operators injured due to exposure to grams of iron that can result in delayed operator work because the accident has the largest RPN value of 210, with details of severity 6, occurrence 7, and detection 5. The conclusion of this study is that PT. XYZ, which does not provide self-protection equipment for workers in the production department, is the most prevalent cause of work accidents, so more attention should be paid to the procurement of protective equipment and requiring workers to wear it.
References
Darsini, D., Prakoso, R.A. dan Sari, M.P. (2022) ‘Manajemen Risiko Keselamatan Dan Kesehatan Kerja Pada Proyek Konstruksi Bendungan XYZ Dengan Metode FMEA’, Jurnal Inkofar, 6(1), hal. 27–32.
Firmansyah, M.I. dan Basuki, M. (2021) ‘Risk Assessment K3 Pada Pekerjaan Bongkar Muat Di Dermaga Jamrud Surabaya Menggunakan Metode Hirac Dan FMEA’, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), 3(1), hal. 372–382.
Kurnianto, M.F., Kusnadi, K. dan Azizah, F.N. (2022) ‘Usulan Perbaikan Risiko Kecelakaan Kerja Dengan Metode Failure Mode And Effect Analysis (FMEA) Dan Fishbone Diagram’, SELAPARANG: Jurnal Pengabdian Masyarakat Berkemajuan, 6(1), hal. 18–23.
Moubray, J. (2001) Reliability-centered Maintenance. Industrial Press Inc. [Cetak].
Mu’adzah, M. dan Firmansyah, N.A. (2021) ‘Manajemen Risiko K3 Pada Divisi Produksi Menggunakan FMEA Dan RCA DI PT. XYZ’, Jurnal Teknologi Dan Manajemen Industri, 1(2), hal. 15–22.
Nasir, M.A. dan Andesta, D. (2022) ‘Pendekatan Metode Failure Mode and Effect Analysis Dalam Analisis Risiko Kecelakaan Kerja Di Unit Fabrikasi Baja PT. XYZ’, Jurnal Serambi Engineering, 7(4), hal. 3672–3683.
Rizal, M., Jufriyanto, M. dan Rizqi, A.W. (2022) ‘Analisis Risiko Kecelakaan Kerja Dengan Metode Failure Mode And Effect Analysis (FMEA) (Studi Kasus: Pekerja Project Economizer, Tangki Scrubber dan Draiyer di Bengkel Fabrikasi PT. Petrokimia Gresik)’, SITEKIN: Jurnal Sains, Teknologi dan Industri, 20(1), hal. 156–165.
Rozi, M. F. dan Basuki, M. (2021) ‘Penilaian Risiko Operasional Pada Kmp Drajat Paciran Mengunakan Metode FMEA Dan Bow Tie Risk Assessment’, Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), 3(1), hal. 60–64.
Sholihin, Y.M. dan Bukhori, M. (2021) ‘Usulan Penurunan Tingkat Kecelakaan Kerja Dengan Menerapkan Metode FMEA dan FTA pada PT. Jagat Interindo’, Jurnal Rekayasa dan Optimasi Sistem Industri, 3(1), hal. 20–24.
Sukanta, S., Herwanto, D. dan Yulian, Y. (2018) ‘Analisis Kegagalan Sistem Pada Perawatan Mesin Evaporator Menggunakan Metode FMEA dan FTA’, Proceedings of National Colloquium Research And Community Service, 2, hal. 289–295.
Wijaya, I. (2022) ‘Analisa Kecelakaan Kerja Pada Di PT Cipta Unggul Karya Abadi dengan Metode Job Safety Analysis (JSA) dengan Pendekatan Failure Mode And Effect Analysis (FMEA)’, Jurnal Syntax Admiration, 3(2), hal. 258–277.
Yanda, P.P., Herniwanti, H. dan Makomulamin, M. (2020) ‘Identifikasi Dan Analisa Risiko Kecelakaan Kerja Dengan Metode FMEA (Failure Mode And Effect Analysis) Pada Kelompok Tani Palas Baru Rumbai’, Al-Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sciences), 9(1), hal. 10–16.
