Perancangan Sistem Pendingin dan Tata Udara pada Ruang Mesin produksi di PT. X untuk Menjaga Performa dan Ketahanan Komponen Mesin
Installation of Refrigeration and Air Conditioning Systems in The Production Facility on PT. X to Maintain the Performance and Durability of Machine Components
Abstract views: 341 | pdf downloads: 605
Abstract
Several influencing factors, including temperature, air cleanliness, and humidity levels, are necessary to preserve the performance and durability of engine components against injury. Many mechanical and electrical components of the machine were damaged at Company X because the room's temperature, air quality, and humidity did not comply with the machine's standard operating conditions. If nothing is done to enhance the engine room's air conditioning, the engine will sustain greater damage. The purpose of this research is to design a cooling and air-conditioning system in the production machine space in PT. X to maintain the performance and durability of machine components. The engine compartment is 104 m2. The design of the refrigeration and air conditioning systems includes the calculation of the required capacity, analysis, and the creation of design drawings in the engine compartment. According to the calculation, the required engine room refrigeration capacity unit is 9.36 kW with 1640 l/s. This capacity incorporates the requirement for fresh air, which is 245 l/s. With this capacity, the engine's optimal temperature and oxygen quality can be attained.
References
Alam, Md.A. dkk. (2022) ‘Design and development of thermal comfort analysis for air-conditioned compartment’, International Journal on Interactive Design and Manufacturing (IJIDeM), 2022, hal. 1–15.
Ashrae (2021) 2021 ASHRAE Handbook -- Fundamentals. Peachtree Corners, GA: Ashrae [Cetak].
Baharudin, B.B. dan Mardiana, M.M. (2019) ‘Perencanaan Sistem Tata Udara Pada Gedung Kantor Kepala Desa Keban 2’, PETRA : Jurnal Teknologi Pendingin dan Tata Udara, 6(1), hal. 24–32.
Bevirt, W.D. (1990) HVAC Systems Duct Design. 3rd edn. USA: SMACNA Duct Design Committee [Cetak].
BSN (2021) ‘Tata cara perancangan sistem ventilasi dan pengkondisian udara pada bangunan gedung (SNI 03-6572-2001)’. Badan Standardisasi Nasional (BSN) [Cetak].
Haryanto, H., Ramadhanis, M. dan Dekarina, D. (2019) ‘Perencanaan Ducting Pada Gedung Serbaguna Desa Lumpatan I’, PETRA : Jurnal Teknologi Pendingin dan Tata Udara, 6(1), hal. 1–9.
Hendradinata, H. dan Pratama, S.A. (2020) ‘Perhitungan Beban Pendingin Pada Gedung Aula MA Negeri 1 Muba’, PETRA : Jurnal Teknologi Pendingin dan Tata Udara, 7(2), hal. 27–33.
Hidayati, B. dan Irpandi, J. (2020) ‘Perencanaan Sistem Tata Udara Pada Aula Kantor Kwarcab Muba’, PETRA : Jurnal Teknologi Pendingin dan Tata Udara, 7(1), hal. 1–7.
Irawan, F. dan Wawantara, W. (2020) ‘Perhitungan Beban Pendingin Pada Gedung Aula Kantor Camat Lais’, PETRA : Jurnal Teknologi Pendingin dan Tata Udara, 7(1), hal. 8–15.
Liawan, J.P., Tanujaya, H. dan Darmawan, S. (2023) ‘Analisis Aliran Udara dan Kenyamanan Termal di Laboratorium Perpindahan Panas dan Massa menggunakan Metode Computational Fluid Dynamics (CFD)’:, Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa Dan Inovasi, 5(1), hal. 123–134.
Nugraha, N. dkk. (2018) ‘Ventilation Air Conditioning Design’, in Seminar Nasional – XVII Rekayasa dan Aplikasi Teknik Mesin di Industri. Seminar Nasional – XVII Rekayasa dan Aplikasi Teknik Mesin di Industri, Bandung: ITENAS, pp. 49–56.
Pramudhita, A. (2020) ‘Perancangan Sistem Tata Udara Pada Ruang Nicu Di Lantai 3 Rumah Sakit “X”’, JTT (Jurnal Teknologi Terapan), 6(2), hal. 125–135.
Sugiri, M. ada Srihanto, S. (2020) ‘Perencanaan Sistem Pendingin Udara 25 Lantai Pada Gedung Perkantoran Dengan Menggunakan Sistem Ac Central (Water Cooled) Di Jakarta’, PROSIDING SNITT POLTEKBA, 4, hal. 45–57.
Wang, S.K. (2000) Handbook of air conditioning and refrigeration. 2nd ed. New York: McGraw-Hill [Cetak].
Winata, M.I.N. dan Kusumaningrum, N. (2023) ‘Analisa Beban Pendingin Pada Ruang Data Center Di PT. BSH’, Jurnal Teknologi IndustrI, 12(1), hal. 1–8.
